Step 4 Take the spare part out of its ESD bag.
Step 5 Remove the three fan modules from the original controller and install them on the
spare part.
1. Press the latch on the panel, open the panel, and pull out the three fan
modules one by one, as shown in Figure 7-57.
Figure 7-57 Removing fan modules
2. Insert the three fan modules into the spare part and close the panel, as
shown in Figure 7-58.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 197
To Next Page
Loading...
