Figure 7-59 Installing a controller
Step 8 Wait about ve minutes and check the status of the Power indicator on the
controller to determine whether the controller has been powered on, as shown in
Figure 7-60.
● If the Power indicator is steady green, the controller has been powered on.
● If the Power indicator is blinking green and the Alarm indicator is blinking
red, the controller is being located.
● If the Power indicator is blinking green (0.5 Hz), the controller is powered on
and in the BIOS boot process.
● If the Power indicator is blinking green (2 Hz), the controller is in the
operating system boot process or
power-o process.
● If the Power indicator is o, the controller is absent or powered o.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 199
To Next Page
Loading...
