Figure 7-106 Removing a power cable
3. Press the spring on the power module in the arrow direction, and pull the
power module out of the slot while holding the handle. See steps (1) and (2)
in Figure 7-107.
Figure 7-107 Removing a power module
4. Place the removed power module in an ESD bag.
Step 3 Install the AC power module.
1. Take the spare part out of its ESD bag.
2. Push the spare part along the guide rails into a slot until you hear a click.
Spare part spring snaps into the latch so that the spare part does not move.
See Figure 7-108.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 253
To Next Page
Loading...
