Huawei OceanStor V5 Series - Page 269

Step 4 Connect the cables and power on the quorum server.
Step 5 After the quorum server is powered on, reinstall and congure the quorum server
software.
For details, see the BC&DR Solution Product Documentation (Active-Active DCs) .
----End
Follow-up Procedure
Log in to the quorum server, run the qsadmin command to go to the
conguration page of the quorum server software, and run the show server_ip
command to check whether the connection between the quorum server and
storage devices is in Established state.
Q2qumrom:~ # qsadmin
start main!
Waiting for connecting to server...
admin:/>show server_ip
Index Server IP Server Port
----- --------------- ---------------
1 192.168.6.31 30002
2 192.168.7.31 30002
Index Local IP Local Port Remote IP Remote Port State
----- --------------- --------------- --------------- --------------- ---------
0 192.168.6.31 30002 192.168.6.17 44510 Established
1 192.168.6.31 30002 192.168.6.18 36836 Established
2 192.168.7.31 30002 192.168.7.16 57416 Established
3 192.168.7.31 30002 192.168.7.28 49752 Established
● If yes, the quorum server is added successfully.
● If no, the quorum server fails to be added. Check whether the IP address of
the quorum server is correct.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 260