Figure 7-113 Removing the quorum server
3. Pull out the quorum server along the guide rails away from the cabinet. See
step (2) in Figure 7-113.
4. Place the removed quorum server on the ESD platform for maintenance.
Step 3 Reinstall the quorum server.
1. At least two persons lift the quorum server on two sides and move it to the
cabinet.
2. Place the quorum server on the guide rails and push it into the cabinet, as
shown in Figure 7-114.
Figure 7-114 Installing the quorum server
3. When the two mounting ears on the quorum server contact the mounting
bars on the cabinet, tighten the captive screws on the mounting ears to
secure the quorum server.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 259
To Next Page
Loading...
