If no devices are available in the device list, add devices.
1. Click Add Device.
The Basic Information window is displayed, as shown in Figure 6-3.
Figure 6-3 Add Device Step 2-1: Basic Information
2. Enter basic information, including the IP address and proxy. In the Add Policy
and Select Proxy areas, select Specify IP Address (add a device by the IP
address) and No Proxy, respectively.
3. Click Next.
The
Congure Information window is displayed, as shown in Figure 6-4.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 21
To Next Page
Loading...
