Figure 6-28 Installing an AC power module
Step 10 Insert the power cables.
● Secure the AC power cables with retention clips.
1. Press the locker of the retention clip outwards (as shown in a of step 1 in
Figure 6-29), and meanwhile slide the retention clip to the connection part of
the AC power cable (as shown in b of step 1 in Figure 6-29).
Figure 6-29 Securing the AC power cables with retention clips
2. Loosen the retention clip, as shown in step 2 in Figure 6-29.
3. Press the retention clip inwards to secure the connection part of the AC power
cable, as shown in step 3 in Figure 6-29.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 42
To Next Page
Loading...
