Figure 6-35 Removing an AC power module
Step 5 Put the removed power module into an ESD bag.
Step 6 Take the spare part out of its ESD bag.
Step 7 Insert the spare part into the empty slot until it clicks into place, as shown in
Figure 6-36.
The procedure for installing a DC power module is the same as that for installing an AC
power module. This step uses the AC power module as an example.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 47
To Next Page
Loading...
