Figure 6-36 Installing an AC power module
Step 8 Connect the power cable.
● Secure the AC power cables with retention clips.
1. Press the locker of the retention clip outwards (as shown in a of step 1 in
Figure 6-37), and meanwhile slide the retention clip to the connection part of
the AC power cable (as shown in b of step 1 in Figure 6-37).
Figure 6-37 Securing the AC power cables with retention clips
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 48
To Next Page
Loading...
