Figure 6-44 Installing an AC power module
Step 8 Connect the power cable.
● Secure the AC power cables with retention clips.
1. Press the locker of the retention clip outwards (as shown in a of step 1 in
Figure 6-45), and meanwhile slide the retention clip to the connection part of
the AC power cable (as shown in b of step 1 in Figure 6-45).
Figure 6-45 Securing the AC power cables with retention clips
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 54
To Next Page
Loading...
