Step 3 Pull the spring pin upward, and press the adjustable guide rails of the cable
manager to open the cable manager, as shown in Figure 6-57.
Figure 6-57 Opening the cable manager
Step 4 Remove the power cable from the power module that you want to replace.
1. Loosen the retention clip, as shown in step 1 in Figure 6-58.
Figure 6-58 Removing the AC power cable
2. Pull up the retention clip, as shown in a of step 2 in Figure 6-58.
3. Remove the AC power cable, as shown in b of step 2 in Figure 6-58.
Step 5 Press the latch on the power module and pull out the power module, as shown in
Figure 6-59.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 64
To Next Page
Loading...
