Figure 6-60 Installing a power module
Step 9 Connect the power cable and x the buckle of the power socket to the power
cable.
1. Press the locker of the retention clip outwards (as shown in a of step 1 in
Figure 6-61), and meanwhile slide the retention clip to the connection part of
the AC power cable (as shown in b of step 1 in Figure 6-61).
Figure 6-61 Securing the AC power cables with retention clips
2. Loosen the retention clip, as shown in step 2 in Figure 6-61.
3. Press the retention clip inwards to secure the connection part of the AC power
cable, as shown in step 3 in Figure 6-61
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 66
To Next Page
Loading...
