Step 2 Wear an ESD wrist strap.
Step 3 Remove a fan module, as shown in Figure 6-83.
1. Press the latch on the panel to open the panel.
2. Press the latches on the fan module to pull out the fan module.
Figure 6-83 Removing a fan module
Step 4 Put the removed fan module into an ESD bag.
Step 5 Take the spare part out of its ESD bag.
Step 6 Insert the spare part into the empty slot until it clicks into place, as shown in
Figure 6-84.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 86
To Next Page
Loading...
