Figure 7-43 Installing a PCIe card on the mainboard
Step 5 Close the latch. See step (2) in Figure 7-43.
Step 6 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 7 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 8 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 9 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
----End
7.23 Removing the DVD Drive
Remove the DVD drive before replacing it with a new one.
With Eight 2.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 167
To Next Page
Loading...
