Figure 7-28 Removing a fan module
Step 10 Lift the fan module slowly out of the RH2288 V3. See step (2) in Figure 7-28.
Step 11 Place the removed fan module in an ESD bag.
----End
7.16 Installing a Fan Module
Install a fan module to replace the original one or after replacing other components (such as
the mainboard and DVD drive).
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the fan module to be replaced. For details, see 7.15 Removing a Fan Module.
Step 3 Take the spare fan module out of its ESD bag.
Step 4 Insert the fan module along the guide rails into the slot. Check that the fan cable connector is
securely inserted into the mainboard connector. See step (1) in Figure 7-29.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 154
To Next Page
Loading...
