Figure 3-1 Installation process
3.2 Installation Environment
Before installing the server, check that the cabinet, space, temperature, and humidity meet
installation requirements.
3.2.1 Space and Airflow Requirements
To allow for servicing and adequate airflow, observe the following space and airflow
requirements:
l Install the RH2288 V3 in an access-restricted area.
l Keep the area in which the server is located clean and tidy.
l For easy heat dissipation and maintenance, keep a clearance of 800 mm (31.50 in.)
between walls and the front and rear doors of the cabinet.
l Do not block the air intake vents. Otherwise, air intaking and heat dissipation will be
affected.
l Ensure that the air conditioning system in the equipment provides enough wind to ensure
proper heat dissipation of all components.
The server draws in cool air from the front of the cabinet and exhausts hot air from the rear.
Therefore, the front and rear of the cabinet must be well ventilated for optimal heat
dissipation. Figure 3-2 shows the direction of heat dissipation.
RH2288 V3 Server
User Guide
3 Installing and Removing the Server
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 64
To Next Page
Loading...
