Figure 7-99 Removing the flexible NIC
Step 10 Pull out part of the flexible NIC to have the flexible NIC disconnected from the port on the
mainboard. Remove the flexible NIC out of the server. See step (2) in Figure 7-99.
Step 11 Place the removed flexible NIC in an ESD bag.
----End
7.44 Installing the Flexible NIC
Install a flexible NIC if a flexible NIC has failed or needs to be replaced with a new model.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the flexible NIC to be replaced. For details, see 7.43 Removing the Flexible NIC.
Step 3 Take the spare flexible NIC out of its ESD bag.
Step 4 Use a Phillips screwdriver to loosen the screws that secure the flexible NIC to be replaced and
the baffle plate. Remove the baffle plate and install it to the spare flexible NIC.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 218
To Next Page
Loading...
