Step 5 Thread the guide pins on the mainboard through the holes in the flexible NIC, and push the
flexible NIC horizontally into the chassis to have the flexible NIC connected to the connector
on the mainboard. See step (1) in Figure 7-100.
Figure 7-100 Installing a flexible NIC
Step 6 Tighten the two screws using the Phillips screwdriver to secure the flexible NIC. See step (2)
in Figure 7-100.
Step 7 Connect the cables to the flexible NIC.
Step 8 Install the I/O module. For details, see 7.22 Installing a PCIe Card.
Step 9 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 10 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 11 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 12 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
----End
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 219
To Next Page
Loading...
