Step 5 Insert the SATADOM vertically into the connector on the mainboard until it snaps into place.
See Figure 7-105.
Figure 7-105 Installing a SATADOM
Step 6 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 7 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 8 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 9 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
----End
Verification
Step 1 Start the server. When the BIOS startup screen is displayed, press Delete to start the BIOS
Setup Utility.
Step 2 Enter the BIOS password when prompted.
Step 3 Choose Advanced > PCH SATA Configuration and press Enter.
Step 4 Check the component information.
SATADOM 1 and SATADOM 2 correspond to Serial ATA Port 4 and Serial ATA Port 5
respectively.
----End
7.47 Removing an SD Card
Remove a Secure Digital (SD) card if it has failed or needs to be replaced with a new model.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 223
To Next Page
Loading...
