Figure 7-113 Installing a rear hard disk module
Step 7 Install the PCIe card on the mainboard. For details, see 7.22.2 Installing a PCIe Card on the
Mainboard.
Step 8 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 9 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 10 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 11 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
----End
7.49 Removing an SD Card Board
Remove a SD card board before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.
Step 3 Power off the RH2288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Remove all external cables, such as power cables and network cables.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 231
To Next Page
Loading...
