Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the USB flash drive to be replaced. For details, see 7.25 Removing the Internal
USB Flash Drive.
Step 3 Take the spare USB flash drive out of its ESD bag.
Step 4 Insert the USB flash drive into the upper USB port. See Figure 7-55.
Figure 7-55 Installing the USB flash drive
Step 5 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 6 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 7 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 8 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
----End
7.27 Removing the System Battery
Remove the system battery before replacing it with a new one.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 177
To Next Page
Loading...
