9 Common Operations
9.1 Querying the IP Address of the Management Network Port
9.2 Logging In to the iBMC WebUI
9.3 Logging In to the iBMC CLI
9.4 Logging In to the Server Using the Independent Remote Console
9.5 Logging In to the Server over a Serial Port Using PuTTY
9.6 Logging In to the Server over a Network Port Using PuTTY
9.7 Opening the Remote Virtual Console
9.8 Querying the Mapping Between NVMe PCIe SSD Drive Letters, Slot IDs, and Bus IDs in
Linux
9.9 Erasing Storage Media Data
9.1 Querying the IP Address of the Management Network
Port
The default IP address of the iBMC management network port is 192.168.2.100 for RH2288
V3 servers.
You can query the actual IP address of the iBMC management network port on the basic
input/output system (BIOS) or iBMC CLI.
Querying the IP Address on the BIOS
Step 1 Restart the server.
1. Connect a mouse and a keyboard to the two USB ports on the server.
2. Use a VGA cable to connect a monitor to the VGA port on the server.
3. Restart the OS.
4. Press Delete repeatedly when the screen shown in Figure1 BIOS startup screen is
displayed during server startup.
RH2288 V3 Server
User Guide
9 Common Operations
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 266
To Next Page
Loading...
