NOTE
The fan modules are hot-swappable. You can skip steps Step 8 to Step 10 when you can open the
chassis cover without removing the server. The scenarios include but are not limited to: (1) the server is
installed on holding or adjustable guide rails and (2) the server is not installed in a cabinet.
Figure 7-29 Installing a fan module
Step 5 Close the memory window on the air duct. See step (2) in Figure 7-29.
Step 6 Install full-height full-length riser cards if they are required. For details, see 7.20 Installing a
Riser Card.
Step 7 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 8 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 9 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 10 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
----End
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 155
To Next Page
Loading...
