Figure 2-19 Internal cabling for an M.2 SSD riser card on a server with a DVD drive
No. Description BOM Number
1 SATA cable for connecting the SATA2 port of an M.2
SSD riser card to the mainboard (J38)
04051409
2 Power cable for connecting the DVD drive to the
front disk backplane (J11)
04050689
3 Signal cable for connecting the DVD drive to the
mainboard (J37)
04050689
Internal Cabling for an M.2 SSD Riser Card on a Server Without a DVD Drive
For an RH2288 V3 without a DVD drive, an M.2 SSD riser card can be configured with two
M.2 SATA SSD cards, which use the external SATA1 and SATA2 ports.
NOTE
An M.2 SSD riser card can be installed only in a PCIe slot on the mainboard or a riser card.
RH2288 V3 Server
User Guide
2 Overview
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 35
To Next Page
Loading...
