Issue Date Description
13 2017-03-03 Modified the configuration description. For details,
see 2.1 Introduction.
12 2017-01-24 Added description about replacing the front bezel
during hard disk replacement. For details, see 7.5
Removing a Hard Disk and 7.6 Installing a Hard
Disk.
11 2016-11-29 Added information about CPU installation tool. For
details, see 7.37 Removing a CPU and 7.38
Installing a CPU.
Modified the indicator status description of the NVMe
PCIe SSD installation. For details, see 7.8 Installing
an NVMe PCIe SSD.
10 2016-10-10 Modified the disk installation direction for servers that
support 8 x 2.5-inch, 24 x 2.5-inch, or 25 x 2.5-inch
hard disks. For details, see 2.2 Appearance.
09 2016-07-30 Added security description. For details, see 1 Safety
Instructions.
Added the description of the Software and
Configuration Utility. For details, see 6 Software and
Configuration Utility.
08 2016-03-30 Added the procedures for removing and installing an
NVMe PCIe SSD. For details, see 7.7 Removing an
NVMe PCIe SSD and 7.8 Installing an NVMe PCIe
SSD.
Added the procedures for removing and installing an
M.2 SATA SSD card. For details, see 7.61 Removing
an M.2 SATA SSD Card and 7.62 Installing an M.2
SATA SSD Card.
07 2015-11-06 Modified the mainboard layout description. For
details, see 2.6 Mainboard Layout.
06 2015-10-15 Added the procedure for operating the front bezel. For
details, see 7.3 (Optional) Removing the Front
Bezel and 7.4 (Optional) Installing the Front Bezel.
Added internal cabling. For details, see 2.7 Internal
Cabling.
05 2015-06-10 Added the procedure for removing the RH2288 V3
installed on the holding rails. For details, see 7.11
Removing the Chassis Cover.
04 2015-03-27 Added product specifications. For details, see 2.11
Product Specifications.
03 2014-12-30 Modified the product name.
RH2288 V3 Server
User Guide
About This Document
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. v
To Next Page
Loading...
