RMS-SNMP01A SNMP Card
User Manual
3 Installation and Basic Settings
Copyright © Huawei Technologies Co., Ltd.
3 Installation and Basic Settings
3.1 Preparations
Before installing the SNMP card, prepare materials and tools listed in Table 3-1.
Table 3-1 Materials and tools
Appearance, Specifications, and Name
Network cable
(RJ45 connectors on
both ends)
Electrostatic
discharge (ESD)
gloves
3.2 Precautions
The SNMP card supports hot swap, when it is not equipped with a temperature and
humidity sensor. The SNMP card does not support hot swap, when it is equipped with a
temperature and humidity sensor.
Some electronic components in the SNMP card are sensitive to ESD. Do not use your
hands or electrical objects to touch electronic components or circuits in the SNMP card,
preventing ESD from damaging the SNMP card. Hold the edges of the SNMP card when
you move or install it.
Wear ESD gloves when you install the SNMP card.
To Next Page
Loading...
Need help?
General
