RMS-SNMP01A SNMP Card
User Manual
3 Installation and Basic Settings
Copyright © Huawei Technologies Co., Ltd.
3.5.3 GSM Modem
A GSM modem provided by Huawei can be configured for the SNMP card. The GSM modem
model needs to be determined based on the actual situation. Figure 3-7 shows the GSM
modem appearance.
The device that needs to receive short messages from the GSM modem must support short messages
in the 3GPP TS 23.038 8-bit format.
The UPS2000-G used with the SNMP card does not support the GSM modem.
If a GSM modem is configured for the SNMP card, and a SIM card is inserted properly, users can
view the SMS module status (indicating that the SMS module is present) in the communication
status bar of the WebUI, as shown in Figure 4-9. If a GSM modem is not configured, the status
indicates that the SMS module is not present.
Only the SMS function of the GSM modem is used. This function enables information such as UPS
fault alarms to be sent and received by short message. For details, see the alarm notification
configuration in section 4.6.1 Comm. Config Page. For details about other functions of the GSM
modem and the methods for using these functions, see related manuals delivered with the GSM
modem.
Figure 3-7 GSM modem appearance
To Next Page
Loading...
