RMS-SNMP01A SNMP Card
User Manual
4 Managing the UPS on the WebUI
Copyright © Huawei Technologies Co., Ltd.
Figure 4-20 Historical Alarms Query page
4.6 Configuration Page
4.6.1 Comm. Config Page
On the main menu bar, click Config. The Comm. Config page is displayed by default, as
shown in Figure 4-21. You can also click User Mgmt., Site Config, Performance Data,
SNMP, and RCCMD.
The Comm. Config page allows you to change the system IP settings, and configure a
sender's email, and configure an alarm notification, perform RMS-RELAY02B settings, CIM
settings, and CIM information settings.
Changing the IP Address of the SNMP Card
Under System IP Settings, change the SNMP card IP address and click Submit, as shown in
Figure 4-21. Log in to the WebUI with the new IP address.
To Next Page
Loading...
