RMS-SNMP01A SNMP Card
User Manual
4 Managing the UPS on the WebUI
Copyright © Huawei Technologies Co., Ltd.
4 Managing the UPS on the WebUI
4.1 Introduction to Web Pages
User interfaces displayed in this document correspond to the version UPS2000
V200R001C91B082 and are for reference only.
Monitoring page
− The Active Alarms page displays active alarms generated for the UPS.
− The Real-Time Data page displays real-time running data of UPS modules and
battery strings.
− The Param. Settings page allows you to set the UPS temperature and humidity
alarm parameters and information about battery strings connected to each UPS.
− The Control page allows you to start or shut down the UPS, perform battery
maintenance operations (only for UPS2000-G), reset the CIM and BIM, perform
blinking, and measure internal resistances.
Query page
− The Logs page allows you to query users' operation information to know recent
operations.
− The Performance Data page displays the performance data of each UPS. You can
query and export the performance data of a selected UPS.
− The Historical Alarms page displays alarms of each UPS. You can query and
export the historical alarms of the selected UPS.
Config page
− The Comm. Config page allows you to configure the IP address of SNMP card,
NAT mapping, Sender's Email Settings, Alarm Notification, RMS-RELAY02B
Settings, and perform CIM Settings and CIM Information Settings.
− The User Mgmt page allows you to create, change, and delete users.
− The Site Config page allows you to set the system parameters, change the system
date and time, select a time zone, synchronize the local clock, and import the SSL
certificate.
− The Performance Data page allows you to set the performance data save period.
To Next Page
Loading...
