Huawei RMS-SNMP01A - Managing the UPS by Using the NMS Complying with RFC1628 Standard; Installing the UPS MIB Library; Managing the UPS by Using the NMS; Applying for Access Rights

RMS-SNMP01A SNMP Card
User Manual
7 Managing the UPS by Using the NMS Complying with
RFC1628 Standard
Issue 08 (2020-01-09)
Copyright © Huawei Technologies Co., Ltd.
64
7 Managing the UPS by Using the NMS
Complying with RFC1628 Standard
7.1 Installing the UPS MIB Library
Downloading the MIB Library
The MIB library is in the SNMP card. Click Download UPS-RFC1628-MIB on the page of
the web browser to download the MIB file which allows the third-party NMS Generex to
manage the UPS remotely. For details, see 4.6.1 Comm. Config Page.

The UPS-RFC1628-MIB has more alarms than RFC1628. Download the UPS-RFC1628-MIB
before using.

For a single UPS, you do not need to set the ESN. For a parallel system, set the ESN of the UPS in
which the SNMP card is located on the Config > RCCMD page.
7.2 Managing the UPS by Using the NMS
7.2.1 Applying for Access Rights
To manage the UPS by using the UNMS of Generex over an SNMP card, apply to the system
administrator of the SNMP card for access rights and add the NMS information to the NMS
access list of the SNMP card. NMS Address and Permission Settings is used for adding
information about the NMS accessing the SNMP card, including the NMS address, access
right, and Trap port. For details about how to add an NMS over a web browser, see 4.6.5
SNMP.
7.2.2 Managing the UPS
Take the UNMS of Generex as an example. The method for managing the UPS by using the
UNMS is the same as the method for managing other devices by using the UNMS. For details,
see the UNMS user manual.