RMS-SNMP01A SNMP Card
User Manual
4 Managing the UPS on the WebUI
Copyright © Huawei Technologies Co., Ltd.
− The SNMP page allows you to change the SNMP version, add an NMS, and
configure the SNMP TRAP.
− The RCCMD page allows you to configure the ESN, shut down RCCMD, perform
SSL encrypted transmission, configure events, and manage the RCCMD certificate.
Maintenance page
− The Data Maintenance page allows you to export the users' operation records,
export the performance data, historical alarms, serviceability data, and CIM
electronic labels of a single UPS or all UPSs over WebUI, and delete the
performance data and historical alarms of a single UPS or all UPSs.
− The Upgrade page allows you to upgrade the SNMP card software. For the
UPS2000-A, you can also upgrade the UPS software.
4.2 Preparations for Login
4.2.1 Installing an HTTPS Certificate for the Web Browser
Open the web browser (Internet Explorer 8 as an example). In the address box, enter the
SNMP card IP address to open the login page. If the SNMP card IP address is not changed,
enter https://192.168.0.10. When you access a web server over Hypertext Transfer Protocol
Secure (HTTPS), a security warning is displayed, as shown in Figure 4-1.
Figure 4-1 Security warning
After you select Continue to this website (not recommended) in Figure 4-1, click
Certificate Error in the upper right corner. A dialog box is displayed, as shown in Figure 4-2.
To Next Page
Loading...
