RMS-SNMP01A SNMP Card
User Manual
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
1. Wear electrostatic discharge (ESD) gloves when you install the SNMP card.
2. Do not hot-swap the SNMP card that is connected to a temperature and humidity sensor.
3. Change the preset password in your first login to the SNMP card on the WebUI. For
details, see section 4.6.2 User Mgmt. Page.
4. Change the preset password in your first login to the SNMP card over Secure Shell
(SSH). For details, see section 13.2 Changing an Authentication Password.
5. Exercise caution when manually shutting down the UPS inverter for transferring to
bypass mode, or when adjusting the UPS output voltage level or frequency. Doing so
may affect the power supply to equipment.
6. Exercise caution when setting battery parameters. Incorrect settings will affect the power
supply and battery lifespan.
To Next Page
Loading...
Need help?
General
