RMS-SNMP01A SNMP Card
User Manual
Copyright © Huawei Technologies Co., Ltd.
About This Document
Purpose
This document describes the RMS-SNMP01A in terms of its features, appearance, installation,
usage, and operation.
The RMS-SNMP01A is an optional communications card which is designed for the
UPS2000-G-(6 kVA–20 kVA) and UPS2000-A-(6 kVA–10 kVA) series.
In this document, Simple Network Management Protocol (SNMP) card is short for
RMS-SNMP01A.
Intended Audience
This document is intended for:
Sales engineer
Technical support engineer
System engineer
Hardware installation engineer
Commissioning engineer
Data configuration engineer
Maintenance engineer
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if
not avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
To Next Page
Loading...
Need help?
General
