Huawei UPS2000-G Series User Manual

Table 2-2 Optional components for the UPS2000
Optional
Component
Model Function Remarks
Parallel cable DB15M, CC8P0.48B(S), DB15F Connect UPSs in parallel. A parallel cable is
1.5 meters long.
Battery
temperature
sensor
TE820E10B/W103-B02-L1 Measures the ambient
temperature of the
external power module
and battery pack.
The temperature
ranges from –40ºC
to +80ºC.
The standard cable
is 2 meters long.
To increase the
length, install a
magnetic ring at
the sensor plug.
Ambient
temperature
and humidity
sensor
WS302M2A-5
ENR1DETA MODULE
Measures the UPS
ambient temperature and
humidity. The ambient
temperature ranges from
0–50ºC. The ambient
humidity ranges from to
0%–100% RH.
It is used together
with a Simple
Network
Management
Protocol (SNMP)
card.
SNMP card RMS-SNMP01A Monitors the UPS and the
ambient temperatures
and humidity (if required)
and allows for Ethernet
networking.
● The UPS2000-
G-6KRTS/
UPS2000-
G-10KRTS/
UPS2000-
G-15KRTL/
UPS2000-
G-20KRTL
supports the
SNMP cards
with the BOM
numbers
02350KCR and
02354GJL.
● The UPS2000-
G-15KRTL-01/
UPS2000-
G-20KRTL-01
supports the
SNMP card with
the BOM
number
02354GJL.
UPS2000-G-(6 kVA-20 kVA)
User Manual 2 Quick Introduction
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 26

Huawei UPS2000-G Series Specifications

General

Frequency	50/60 Hz
Output Power Factor	0.9
Humidity	0% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Capacity	1 kVA, 2 kVA, 3 kVA
Input Voltage	220 Vac (120 Vac/208 Vac/230 Vac/240 Vac)
Output Voltage	220/230/240 VAC
Efficiency	Up to 95%
Topology	Double conversion online
Battery Type	Sealed Lead Acid
Communication Ports	USB, RS232
Optional Communication	SNMP
Operating Temperature	0°C to 40°C