Huawei UPS2000-G Series User Manual

Optional
Component
Model Function Remarks
Modbus card RMS-MODBUS01A Provides two cascaded
RJ45 ports to implement
networking over the
Modbus or YDN-23
protocol.
● The UPS2000-
G-6KRTS/
UPS2000-
G-10KRTS/
UPS2000-
G-15KRTL/
UPS2000-
G-20KRTL
supports the
Modbus cards
with the BOM
numbers
02355639 and
02354GLU.
● The UPS2000-
G-15KRTL-01/
UPS2000-
G-20KRTL-01
supports the
Modbus card
with the BOM
number
02354GLU.
Dry contact
card
RMS-RELAY01A Provides six dry contact
outputs (normal mode,
battery mode, bypass
mode, low battery
voltage, bypass backfeed,
and UPS faults), as well
as two dry contact control
inputs (one is the
shutdown signal input,
and the other is reserved).
● The UPS2000-
G-6KRTS/
UPS2000-
G-10KRTS/
UPS2000-
G-15KRTL/
UPS2000-
G-20KRTL
supports the dry
contact cards
with BOM
numbers
02355640 and
02354GJK.
● The UPS2000-
G-15KRTL-01/
UPS2000-
G-20KRTL-01
supports the dry
contact card
with the BOM
number
02354GJK.
UPS2000-G-(6 kVA-20 kVA)
User Manual 2 Quick Introduction
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 28

Huawei UPS2000-G Series Specifications

General

Frequency	50/60 Hz
Output Power Factor	0.9
Humidity	0% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Capacity	1 kVA, 2 kVA, 3 kVA
Input Voltage	220 Vac (120 Vac/208 Vac/230 Vac/240 Vac)
Output Voltage	220/230/240 VAC
Efficiency	Up to 95%
Topology	Double conversion online
Battery Type	Sealed Lead Acid
Communication Ports	USB, RS232
Optional Communication	SNMP
Operating Temperature	0°C to 40°C