Huawei UPS5000-A-30 kVA - Page 112

UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual
4 LCD and WebUI
Issue 11 (2018-12-10)
Copyright © Huawei Technologies Co., Ltd.
103
Table 4-5 Bypass Input
Item
Description
Van, Vbn, and Vcn
Bypass input phase voltage
Ia, Ib, and Ic
Bypass input phase current
Frequency
Bypass input frequency
Vab, Vbc, and Vca
Bypass input line voltages
Table 4-6 Battery Status
Item
Description
Voltage and current
Positive and negative battery string currents. + is
displayed during battery charge, and – is displayed
during battery discharge. The positive voltage and current
and negative voltage and current are displayed for the
battery version with neutral wire. Only the voltage and
current are displayed for the battery version without
neutral wire.
Status
The value can be Not connected, Not chg. or dis.,
Hibernating, Flt. charging, Eql. Charging, or
discharging.
Capacity
Remaining battery capacity
Backup time
Battery backup time estimated at the current load
Temperature
Battery operating temperature
SOH
State of health
Table 4-7 UPS Output
Item
Description
Van, Vbn, and Vcn
UPS output phase voltage
Ia, Ib, and Ic
UPS output phase current
Power factor_A, Power
factor_B, and Power factor_C
Proportion of passive power to apparent power for each
phase
Frequency
UPS output frequency
Vab, Vbc, and Vca
UPS output line voltages