Huawei UPS5000-A-30 kVA - Alarms

UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual
4 LCD and WebUI
Issue 11 (2018-12-10)
Copyright © Huawei Technologies Co., Ltd.
105

If the value is less than 1, the value takes 0.

If the value is greater than or equal to 1 and less than 2, the value takes 1.
4.2.3 Alarms
On the Main Menu screen, select Alarms and press . The Alarms screen is displayed,
as shown in Figure 4-4.
Figure 4-4 Alarms screen
Sort Alarms
Figure 4-5 shows the Sort Alarms screen.
Figure 4-5 Sort Alarms screen

Generate (latest first)
Active alarms are displayed by occurrence time. The latest alarms are listed first.

Severity (highest first)
Active alarms are displayed by severity. The most critical alarms are listed first.
√ is displayed next to a selected view mode.
Clear Faults
Select Clear Faults and press . The login screen for accessing the Clear Faults screen is
displayed. Enter the preset password 000001 and press . The Clear Faults screen is
displayed.

If you enter incorrect passwords for three consecutive times, your account will be locked out for 5
minutes.