Huawei UPS5000-A-30 kVA - Installing a Single UPS; Installing the UPS5000-A-30 Kva;40 Kva

UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual
3 Installation
Issue 11 (2018-12-10)
Copyright © Huawei Technologies Co., Ltd.
48
Figure 3-11 Removing the L-shaped bracket
Store the removed L-shaped bracket, which will be used to secure the UPS.
Step 9 Push the cabinet along the sliding plate to the installation position.
----End
3.2 Installing a Single UPS
3.2.1 Installing the UPS5000-A-30 kVA/40 kVA
Tower-mounting the UPS
Step 1 Assemble support bases. When you assemble two modules, snap the fasteners into the holes
to secure them, as shown in Figure 3-12.