UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual
Copyright © Huawei Technologies Co., Ltd.
Figure 4-40 RCCMD function enabled
SSL Encrypted Transmission
The SSL encrypted transmission set on the page of the UPS5000 monitor display module
(MDU) must be the same as the setting on the RCCMD client.
SSL Encrypted Transmission is set to Enable by default, as shown in Figure 4-41. If it is set
to Disable, the RCCMD certificate controls will not be displayed on the page, as shown in
Figure 4-42. If SSL Encrypted Transmission is set to Disable, a message indicating there is
a risk will be displayed.
To Next Page
Loading...
