Huawei USG6000 - Impact of Command Changes

Feature Change Description Cause Impact of the Upgrade
IPSec
The maximum IPSec
anti-replay window size
can be 8K.
The function is
enhanced.
None
IPSec
IPSec supports the
DH18 algorithm.
The function is
enhanced.
None
IPSec
Interworking between
multi-VPN instance and
IPSec is supported.
The function is
enhanced.
None
Deleted Features
None
2.1.3.1.2 Impact of Command Changes
New Commands
Command
Description Impact
[ undo ]ppp accm { accm |
enable }
Enables/disables the PPP
ACCM function.
None
display inventory ne-id ne-
id
Displays the inventory data
of a specific NE.
None
display rm bfd-session [ all |
[ [ vpn-instance vpn-
instance-name ]
[ destination destination-
address ] [ source source-
address ] [ interface
interface-type interface-
number ] [ protocol { bgp |
isis-l1 | isis-l2 | isis-l1l2 |
ospf | rip | pim } ] ] ]
displays the configurations
of BFD sessions in Route
Management (RM). The
configurations include the
global status of BFD,
number of BFD sessions,
and VPN instance,
destination address, source
address, interface, and
session status of each BFD
session.
None
[ undo ] ipv6 route-static
track bfd-session session-
name STRING<1-15>
admindown invalid
The command deletes the
configured static routes.
None
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
111