NOTICE
l The dynamic load component package must be compatible with the version software.
Therefore, ensure that the component package of the corresponding version is available.
l The dynamic load component package is license-controlled and unavailable by default.
You must dynamically load a component package to use the corresponding feature.
l You must dynamically load the dynamic load component package after the upgrade to V5.
Otherwise, corresponding features are unavailable.
l The corresponding feature configurations do not take effect immediately after the dynamic
component package is loaded. You must leave the configurations unsaved and restart the
device. Then, the device will load and save the configurations and restore services.
l If the version is upgraded to V500R001C80 or a later version for the first time, the
matching full content security package can still be used. After the upgrade succeeds, the
basic and enhanced content security packages should be used.
l The content security component of V500R001C80 cannot be directly installed and loaded
or set to the package for next startup in V500R001C80. It can be set to the package for
next startup only in versions earlier than V500R001C80.
l Before the upgrade from versions earlier than V500R001C80 to V500R001C80, set the
content security package for next startup can be set to the one in V500R001C80 because
the versions earlier than V500R001C80 cannot identify the basic content security package
or the enhanced content security package.
l After the content security component is upgraded from versions earlier than
V500R001C80 to versions later than V500R001C80, the function is not affected, but the
basic content security component and enhanced content security component cannot be
loaded.
l To upgrade the content security package that has been upgraded from V500R001C60 or
earlier versions to V500R001C80, cancel the current package for next startup, set a
package for next startup, and restart the device.
1.2.2 Other Upgrade Impacts
1. Impact on NLOG:
Table 1-2 NLog system difference description
Version
Version Whether Support
the Upgrade to
V500R001C80SP
C100
Difference from
the Source
Version
V500R001C00 No Yes Difference from
the Source Version
V500R001C20SPC
100
Yes Yes None
V500R001C20SPC
200
Yes Yes None
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
To Next Page
Loading...
