Huawei USG6000 - 2.2.5.5 Upgrade Through BootROM

following information is a part of the command output. If the State value is INSTALL_OK,
the component packet has been successfully loaded.
<sysname> display module-information verbose
Module Information
------------------------------------------------------------------------
Module Version InstallTime PackageName
------------------------------------------------------------------------
ConSecGroup 1.0.0.0 2015-12-23 11:13:37+00:00 CSG_H50010000_xxx.mod
URL Filter 1.0.0.0 2015-12-23 11:13:37+00:00 URLRMT_H50010000_xxx.mod
************************************************************************
* Content Security Group information, as follows: *
************************************************************************
Slot Type State Detail
------------------------------------------------------------------------
- NP INSTALL_OK -
************************************************************************
* URL Filter information , as follows: *
************************************************************************
Slot Type State Detail
------------------------------------------------------------------------
- NP INSTALL_OK -
NOTICE
Restart the device. Then, the device will automatically load the content security component
package based on the license functions. To ensure that the sensitive feature configuration
takes effect, restart the device without saving the configuration or run the reboot fast
command to restart the device and re-load the configuration.
Now, the upgrade to V500R001 is complete. The optional follow-up task is to restore and test
services.
Step 6 (Optional) Update the signature databases of security functions.
Before upgrading the signature database, ensure that the activated license file contains the
content security function.
If the latest signature databases are not required, skip this step. The NGFW will automatically
load the default signature databases after startup.
If the latest signature database is required, you can upgrade the signature database in either
the online or local upgrade mode. For details, see the chapter "Upgrade Center " in the
HUAWEI USG6000&USG9500 V500R001C80SPC100 Product Documentation.
----End
2.2.5.5 Upgrade Through BootROM
Context
Figure 1 shows the flow of upgrading the version software through BootROM.
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
155