Huawei USG6000 - Upgrade through CF Card

NOTICE
l If the configuration file is imported, do not restart the device.
l For the upgrade from V500R001C00 to V500R001C80SPC100, if the configuration file is
not imported, you are advised to save the current configurations before restarting the
device.
The duration of device startup depends on the hardware configurations and configuration file.
The more boards the device has, the longer the board registration lasts; the more items are
configured, the longer the configuration restoration lasts.
Step 8 (Optional) Update the signature databases of security functions.
Before upgrading the signature database, ensure that the activated license file contains the
content security function.
If the latest signature databases are not required, skip this step. The NGFW will automatically
load the default signature databases after startup.
If the latest signature database is required, you can upgrade the signature database in either
the online or local upgrade mode. For details, see the chapter "Upgrade Center " in the
HUAWEI USG6000&USG9500 V500R001C80SPC100 Product Documentation.
----End
2.2.5.4 Upgrade Through CF Card
Upgrade Flow
Figure 1 shows the flow of upgrading the version software through CF card.
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
152