Huawei USG6000 - License Impact; Dynamic Loading

The command Cause of Deletion Impact
dot1x port-control { auto |
authorized-force |
unauthorized-force }
This The command is not
supported in this version.
None
dot1x reauthenticate mac-
address mas-addres
This The command is not
supported in this version.
None
dot1x timer reauthenticate-
period
INTEGER<60-7200>
This The command is not
supported in this version.
None
dot1x timer { quiet-period
INTEGER<1-3600> | tx-
period INTEGER<1-120> }
This The command is not
supported in this version. None
undo access-user arp-detect
default ip-address
This The command is not
supported in this version.
None
undo authentication trigger-
condition [ arp | dhcp ] *
This The command is not
supported in this version.
None
undo dot1x authentication-
method
This The command is not
supported in this version.
None
undo dot1x port-control This The command is not
supported in this version.
None
undo dot1x quiet-times This The command is not
supported in this version.
None
undo dot1x retry This The command is not
supported in this version.
None
undo dot1x timer client-
timeout
This The command is not
supported in this version.
None
undo dot1x timer
reauthenticate-period
This The command is not
supported in this version.
None
display dot1x version This The command is not
supported in this version.
None
reset dot1x statistics This The command is not
supported in this version.
None
1.2.1.3 License Impact
The license can still be used after the upgrade from V500R001C80 to V500R001C80SPC100.
1.2.1.4 Dynamic Loading
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18