Huawei USG6000 - 2.2.6 Upgrade Result Verification; 2.2.6.1 Checking the Information About the Current Version Software

NOTICE
Restart the device. Then, the device will automatically load the content security component
package based on the license functions. To ensure that the sensitive feature configuration
takes effect, restart the device without saving the configuration or run the reboot fast
command to restart the device and re-load the configuration.
Now, the upgrade to V500R001 is complete. The optional follow-up task is to restore and test
services.
Step 19 (Optional) Update the signature databases of security functions.
Before upgrading the signature database, ensure that the activated license file contains the
content security function.
If the latest signature databases are not required, skip this step. The NGFW will automatically
load the default signature databases after startup.
If the latest signature database is required, you can upgrade the signature database in either
the online or local upgrade mode. For details, see the chapter "Upgrade Center " in the
HUAWEI USG6000&USG9500 V500R001C80SPC100 Product Documentation.
----End
2.2.6 Upgrade Result Verification
2.2.6.1 Checking the Information About the Current Version Software
Example
After the device is started, log in to the CLI. In any view, run the display version command to
check the information about the running version software. The following is a sample output
for this command.
<USG9500> display version
Huawei Technologies Versatile Security Platform Software
Software Version: USG9520&USG9560&USG9580 V500R001C80SPC100(VSP (R) Software,
Version 5.70)
..........
In any view, run the display startup command to check the version software and
configuration file in use.
<USG9500> display startup
MainBoard:
Configured startup system software: cfcard:/USG9520V500R001C80SPC100.cc
Startup system software: cfcard:/USG9520V500R001C80SPC100.cc
Next startup system software: cfcard:/USG9520V500R001C80SPC100.cc
Startup saved-configuration file: cfcard:/config.cfg
Next startup saved-configuration file: cfcard:/config.cfg
Startup paf file: cfcard:/paf.txt
Next startup paf file: cfcard:/paf.txt
Startup license file: cfcard:/license.txt
Next startup license file: cfcard:/license.txt
Startup patch package: cfcard:/patchpackage.pat
Next startup patch package: cfcard:/patchpackage.pat
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
163