Huawei USG6000 - Checking the Remaining Space of the CF Card

Step 2 Set the transmission mode of the file and configure the directory for storing the backup file as
a directory on PC2, for example, D:\FTP\Backup. Note that the directory must already exist.
You can use another existing directory as required.
ftp> binary /Run the binary command to configure the binary mode for
transmitting files.
ftp> lcd "d:\FTP\Backup" /Configure the directory on PC2 for storing the backup
file.
Step 3 Run the getremote-filename [ local-filename ] command to download the file and save it in
the D:\FTP\Backup directory of PC2.For example, download config.cfg, paf.txt,
license_huawei_x.txt, license.dat (if available),sensitive feature component package*.mod(if
available) and the system program before the upgrade (v500r001c50.cc) to PC2 for backup.
ftp> get config.cfg
..........
ftp: 4545 bytes received in 0.01Seconds 303.00Kbytes/sec.
ftp> get license.dat
..........
ftp: 2032 bytes received in 0.01Seconds 202.83Kbytes/sec.
ftp> get paf.txt
..........
ftp: 109256 bytes received in 1.3Seconds 1087.67Kbytes/sec.
ftp> get get v500r001c50.cc
..........
ftp: 216118051 bytes received in 82.90Seconds 1087.67Kbytes/sec.
ftp> get license_huawei_x.txt
..........
ftp: 15307 bytes received in 1.3Seconds 1087.67Kbytes/sec.
ftp>cd $_install_mod
ftp> get CSG_H50010000.mod
..........
ftp: 955129 bytes received in 82.90Seconds 1087.67Kbytes/sec.
ftp> get URLRMT_H50010000.mod
..........
ftp: 955129 bytes received in 82.90Seconds 1087.67Kbytes/sec.
After the downloading is complete, check whether the sizes of the files on PC2 are the same
as those in the CF card. If no, re-download files to ensure that they are completely backed up
to PC2.
After the configuration is verified, you can either keep this FTP connection for further use, or
exit from the FTP server and relog in to it when required.
----End
2.2.4.8 Checking the Remaining Space of the CF Card
Checking Remaining Space
In the user view, run the dir cfcard: command to check the remaining space of CF card 1 and
ensure that CF card 1 has sufficient space to contain the target version software.
<USG9500> dir cfcard:
Directory of cfcard:/
0 -rw- 53 Jan 25 2010 12:19:36 private-
data.txt
1 -rw- 66033 Jan 25 2010 12:10:50
paf.txt
2 -rw- 12757 Jan 25 2010 12:11:02
license.txt
3 -rw- 4545 Sep 25 2009 16:02:46
config.cfg
4 -rw- 216118051 Jan 25 2010 12:15:38 USG9500v500r001c00.cc
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
140