Huawei USG6000 - 2.2.5 Upgrade Procedure

5 -rw- 2032 Feb 05 2010 11:12:38
license.dat
..........
1013760 KB total (791776 KB free)
The underscored text indicates the remaining space of CF card 1.
In addition, you can run the dir cfcard2: command in the user view to check the free space of
CF card 2. If no log server is deployed on the live network, and the free space of the CF card
2 is insufficient, you can manually save log files to a PC through FTP, preventing new logs
from overriding old ones.
<USG9500> dir cfcard2:
Directory of cfcard2:/
0 drw- - Jan 06 2011 05:54:48 log
498680 KB total (286512 KB free)
The underscored text in the previous information indicates the free space of CF card 2.
Deleting Unnecessary Files
If the remaining space is smaller than the size of the target version software, you need to
delete unnecessary files. In the user view, run the delete command to delete useless files in
CF card 1.
<USG9500> delete /unreserved cfcard:/bak.txt
The contents cannot be recycled!!! Delete cfcard:/bak.txt?[Y/N]:y
<USG9500> delete /unreserved slave#cfcard:/bak.txt
The contents cannot be recycled!!! Delete slave#cfcard:/bak.txt?[y/n]:y
Files are directly deleted and cannot be restored after the delete command with the /
unreserved parameter is configured.
NOTE
l The system program (*.cc) is large in size. Deleting unnecessary system programs can greatly save
the space of CF card 1. However, you cannot delete the system program currently used by the
device.
l If you use the BootROM for upgrade, delete the useless files in BootROM environment. For details
on operation methods, see Upgrade Through BootROM.
2.2.5 Upgrade Procedure
2.2.5.1 Upgrade Modes
To enable the upgrade from an earlier version to V500R001C80SPC100, select a proper
upgrade mode as required, as shown in Table 2.
Upgrade modes
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
141