Huawei USG6000 - Page 26

Table 1-1 Deleted Commands
The command Cause of Deletion Impact
statistic enable The VLAN statistics
function is not supported.
The command configuration
is lost after the upgrade.
authentication mode
{ multi-share | multi-authen
[ max-user max-user ] }
This The command is not
supported in this version.
None
authentication timer
handshake-period
handshake-period
This The command is not
supported in this version.
None
undo authentication mode
[ multi-authen max-user ]
This The command is not
supported in this version.
None
undo authentication timer
handshake-period
This The command is not
supported in this version.
None
undo dot1x-access-profile This The command is not
supported in this version.
None
display dot1x quiet-user
{ all | mac-address mac-
address }
This The command is not
supported in this version.
None
display dot1x-access-profile
configuration [ name name ]
This The command is not
supported in this version.
None
[ undo ] access-user arp-
detect vlan vlan-id ip-
address ip-address mac-
address mac-address
This The command is not
supported in this version.
None
[ undo ] dot1x mc-trigger
port-up-send enable
This The command is not
supported in this version.
None
[ undo ] dot1x quiet-period This The command is not
supported in this version.
None
[ undo ] dot1x
reauthenticate
This The command is not
supported in this version.
None
[ undo ] dot1x unicast-
trigger
This The command is not
supported in this version.
None
access-user arp-detect
default ip-address ip-
address
This The command is not
supported in this version.
None
authentication trigger-
condition { arp | dhcp } *
This The command is not
supported in this version.
None
dot1x authentication-method
{ chap | pap | eap }
This The command is not
supported in this version.
None
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17