Huawei USG6000 - Page 168

deleted!
Please input the file name you want to delete, e.g.:
test.txt
('*' for display all files and directory in
cfcard:)
cfcard:/ USG9520V500R001C80SPC100.cc
File "cfcard:/USG9520V500R001C80SPC100.cc" will be deleted!
Are you sure? Yes or No(Y/
N)y
Delete successfully!
After the deletion is complete, enter 3 to return to the BootROM main menu.
Step 4 In the BootROM main menu, enter 3 to access the Ethernet submenu.
Enter your choice(1-12): 3
Ethernet Submenu
1. Download file to SDRAM through ethernet interface and boot
2. Download file to CFcard through ethernet interface
3. Modify ethernet interface boot parameters
4. Return to main menu
Step 5 Change the parameter settings of the Ethernet interface mode. In the Ethernet submenu, enter
3. The following information is displayed. After the parameters are specified, return to the
Ethernet submenu.
Enter your choice(1-4): 3
Note: two protocols for download, tftp & ftp.
You can modify the flags following the menu.
tftp--0x80, ftp--0x0.
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : motetsec0
processor number : 0
host name : host
file name : USG9520V500R001C80SPC100.cc
inet on ethernet (e) : 172.16.104.208
inet on backplane (b):
host inet (h) : 172.16.104.20
gateway inet (g) :
user (u) : 123
ftp password (pw) (blank = use rsh): ***
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) :
Parameters to be specified are as follows:
l boot device
The value of parameter boot device is fixed, that is, mottsec3 for the USG9520 and
motetsec0 for the USG9560 and USG9580.
l file name
Indicates the name of the file to be downloaded. The previous information uses
USG9500_USG9520V500R001C80SPC100.cc as an example. If this parameter is blank,
enter the name of the file that you want to download. If this parameter is a file other than
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
159