Huawei USG6000 - Page 22

The command Description Impact
ospfv3 bfd { min-transmit-
interval min-transmit-value |
min-receive-interval min-
receive-value | detect-
multiplier detect-multiplier-
value } * [ instance
instance-id ]
The command enables the
bidirectional forwarding
detection (BFD) on the
specified interface enabled
with OSPFv3, or sets the
parameter values of a BFD
session.
None
undo bfd all-interfaces
enable
The command enables BFD
for OSPF in an OSPF
progress and sets BFD
session parameters.
None
undo bfd all-interfaces
{ min-transmit-interval
[ min-transmit-value ] | min-
receive-interval [ min-
receive-value ] | detect-
multiplier [ detect-
multiplier-value ] } *
The command disables BFD
for OSPFv3 or unconfigures
BFD specific parameters for
OSPFv3. By default, BFD is
not enabled or configured at
OSPFv3 process level.
None
ospfv3 bfd { min-transmit-
interval min-transmit-value |
min-receive-interval min-
receive-value | detect-
multiplier detect-multiplier-
value } * [ instance
instance-id ]
The command deletes the
BFD on the specified
interface, or restores the
default parameter values of
a BFD session. By default,
BFD is not enabled at
OSPFv3 interface level.
None
[ undo ]ppp accm { accm |
enable }
The command enables/
disables the PPP ACCM
function.
None
ip route-static track bfd-
session session-name bfd-
name admindown invalid
The command disables the
static route bound to a
specific BFD session from
participating in route
selection when the BFD
session is Admin down.
None
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13